![]() ![]() It is useful if you plan to port Lakka to a new hardware. The advantage of using this interface is that you can get the logs of the bootloader and the early kernel logs. You will only have access to the command line, not the full desktop environment. On the development boards, using an USB to TTL cable can give you access to the serial console. You can access the command line of a Raspberry Pi remotely from another computer or device on the same network using the Secure Shell (SSH) protocol. Execute systemctl start retroarch.target to make sure that all services/mounts needed for RetroArch (the UI) are running, especially the overlayfs mounts in /tmp (use mount or df -h to see available mounts). AFter the boot process is complete, you will see shell prompt. It’s normal, since we disabled retroarch service. Once the system is booting, you will not see RetroArch launching. retroarch=0 will disable the retroarch service.This method requires the use of the Desktop Application. Most users (including Raspberry Pi and OpenWrt users) will find the following instructions the easiest way to perform installation and 1-by-1 configuration. textmode will enable the console service The Device Package is suitable for most embedded devices and headless installations on Linux.You have to ensure that these options are present in the cmdline: textmode retroarch=0 You will also need to plug a keyboard to type any commands. You will need to edit the cmdline passed to the kernel by the bootloader, in order to enable the console service and disable the retroarch service. The username is root and the password is also root. Use putty to connect your Lakka box, enter the IP of your box in the hostname field, set SSH connection type. On Windows, you will need an SSH client like Putty Just open a terminal, and type this command: ssh will then ask for your password, the default password is root. ![]() If you’re using Linux or Mac OS X, there is already an SSH client on your system. You will also need to know the IP address of your Lakka box. You will need an SSH client to connect to your box. Then, you have to enable SSH in Settings->Services. To access your Lakka box through SSH, you need to connect your Lakka device to the network. SSH is a service running on your Lakka box, it lets you run commands on your box, such as editing configuration files. The easiest way to configure Lakka is to connect it via SSH. There are 3 ways to access the command line interface: For begginners, using the graphical interface should be enough. ![]() NOTE this Virtual Desktop will NOT share the screen with a real display. Accessing Lakka command line interface is useful if you want to debug the system, or if you need to edit the configuration file manually. If you want a desktop you can start/stop remotely you can create a Virtual Desktop. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |